Mac Os X 10.9 Mavericks on Pc Download Updated

Mac Os X 10.9 Mavericks on Pc Download

Hey guys, Here is a guide on "How to install OS Ten 10.9 on a PC with a Gigabyte 990FXA Series Motherboard and AMD FX Series CPU".

Information technology volition also testify you how to dual boot windows and Bone 10 and even run the aforementioned windows install inside of Bone X with VMWare Fusion.

Before nosotros start, Here is the exact specification i am using for my Hackintosh install.

Motherboard: Gigabyte 990FXA-UD3
CPU: AMD FX-6100
Memory: Corsair Vengeance 8GB 1600Mhz (2x4gb)
Graphics Carte du jour: Sapphire AMD Radeon HD 7850 2GB OC Edition (1002 6819)
Operating Systems: Windows 8 and Bone Ten 10.nine.ane

Ok then although this guide is intended for install on the above hardware it may or may not work on other hardware, It volition about likely work on the UD3, UD5 and UD7 motherboards aswell as most modernistic Radeon Hd Graphics.

Requirements

The following items will be required in club for this to work.

Windows 7, eight or 8.1 (DVD or USB)
Niresh 10.9 (Torrent:http://www.niresh12495.com [it'due south the almost downloaded file currently])
A USB Pen (Niresh - 10.nine - Mavericks USB Version.zip) or Dual Layer DVD+R (Niresh - 10.9 - Mavericks ISO Version.cipher)
Access to both Windows and the Niresh Mavericks USB at the aforementioned time.
Y'all demand to have your fourth dimension and be patient. Both windows and OS X take some fourth dimension to install.
1 HDD that is able to be completely formatted (wipe partitioning tabular array)

Notation: you don't need Windows if you don't want to dual kicking

Preparation

I am non going to comprehend how to write the DMG file to a USB pen or DVD and instead will just link you to http://www.macbreaker.com/2014/01/instal...iresh.html (Stride 1a if your currently in Bone X and 1b if your in Windows)

So once you accept the Bootable USB/DVD with Niresh on it we are ready to begin.

We need to format the HDD with the segmentation blazon MBR (for some reason when i did this with windows it didn't work) to do this volition shall boot to the Niresh USB/DVD and at the prompt highlight "Niresh Mavericks" and simply type "amdfx GraphicsEnabler=No PCIRootUID=1 -v" and printing "Enter".

If you don't program on dual booting you tin can skip to "Installing OS 10 10.9".

After a brusque time it should start booting to the Os 10 installer, Select your linguistic communication and and so in the menu bar Select Utilities > Disk Utilities > Select the HDD you want to use > Sectionalisation > 2 Partitions and then gear up the 1st every bit MS-DOS (FAT) proper name it "Windows" and the 2nd as "Mac OS Extended (Journaled)" name information technology "Mavericks" at present select "Options" and make sure information technology's set to "MBR (Master Kick Record)" and then press "Apply"

OK now the HDD is properly partitioned, We at present motility on to installing Windows.

Installing Windows seven, eight or 8.i

This is installed but like normal, Except y'all need to make certain it doesn't install the UEFI version (make sure to select the not UEFI DVD/USB entry from the boot menu)

In one case your at the install simply do a "Custom Install" and then install windows to the 1st Partition it will need to exist formated to NTFS via the format push beneath prior to being installed.

After the install is complete go through the standard welcome screen and post install setup and so we can move on to installing Niresh's OS X 10.ix

Installing Niresh OS Ten x.9

And now we are on to the main event, Installing Bone Ten.

Kick to the Niresh USB/DVD and then at the prompt highlight "Niresh Mavericks" and only blazon "amdfx GraphicsEnabler=No PCIRootUID=1 -v" and press "Enter"

Now you lot should be dorsum at the OS X install screen, This time we will actually install it, Follow the on screen sorcerer until you become to the HDD Select page then select the "Mavericks" disk but DO NOT Press NEXT/INSTALL instead press "Customize" and uncheck the choice "GraphicsEnabler" located under the "Graphics" section.

Now you can begin the install. Press the install button and ready to expect a while depending on your SSD/HDD.

Fixing A Few Issues With Os Ten

Ok now we have OS 10 and Windows installed but most probable booting Os 10 from the HDD won't work and instead yous will demand to use the USB/DVD.

So one time once again boot to the Niresh USB/DVD but and so at the prompt highlight "Mavericks" instead of "Niresh Mavericks" enter ' "Kernel Cache"=amd GraphicsEnabler=No PCIRootUID=1 -v ' notation the quotes need to be entered around the words "Kernel Cache".

Afterward a little while information technology should boot to OS X and ask y'all to enter various information for the welcome screen, Afterward yous take entered this yous should be at either the "Login Screen" or the "Desktop".

If your using the exact aforementioned card as mine you most probable are non running at native resolution and are instead forced to 1024x768, To fix this nosotros need to modify 2 kext files, if your running at native resolution skip the stride below.

Load upward a Concluding (Search > Last) then type "sudo su" and enter admin password, Now blazon "nano /System/Library/Extensions/AMD7000Controller.kext/Contents/Info.plist" and and then discover "68181002" and alter it to your device and vendor ID (mine is 68191002) once done printing "Ctrl or Win + Ten" and then repeat the aforementioned alter for "/System/Library/Extensions/AMDRadeonX4000.kext/Contents/Info.plist".

Now the graphics is sorted provided your using a similar menu to mine atleast, Now we can sort out problems with the bootloader on the HDD, Download "Chameleon Wizard" then run it and select "Boot0HFS" as the install fashion and so press "Install".

Now reboot and you should be able to boot from the HDD and select the "Mavericks" option, you lot may need to enter "GraphicsEnabler=No" and "-v" is useful to come across more detailed/verbose information.

Congratulations you lot are done sorting out Os X, The steps below are optional merely highly recommended.

Updating the AMD Kernel and Bone Ten

So you successfully got OS X working on your system, Now we should update OS X to the latest version (10.9.1 as of the time i was writing this) and the AMD Kernel to a newer and faster version.

Download the following file http://www.osx86.net/files/download/3736...iv-support/ and extract information technology.

Next select "Get" on the menu bar, and then "Go to folder" and so "/", This will put you to the root of the OS Ten Partition, At present we need to replace the mach_kernel with the download mach_kernel file. Simply copy and paste and ostend the hallmark.

At present we need to copy the downloaded "System.kext" to "/System/Library/Extensions/", once this is done you lot will most probable get some errors don't panic!.

Now we load "Kext Magician" (installed with niresh) and select "Repair" and "Rebuild" under the "/System/Library/Extensions/".

Once "Kext Wizard" is done, Click the "Apple tree icon" in the "Menu Bar" and select "Software Update" and "Update All", This will take a little while, When asked to reboot say yes.

Now your organization should reboot and y'all should be dorsum at Bone X at 10.ix.1 instead of ten.9.0.

Running Windows 8 Within OS X Using VMWare Fusion

Ok then, And then far nosotros have Windows and OS 10 installed to the aforementioned HDD on your PC, Now we will apply the physical install of Windows within of VMWare Fusion this will allow us to utilise Windows both inside of OS Ten and every bit a bodily boot choice.

Of Grade this requires VMWare Fusion and this is a commercial piece of software therefore y'all will demand to learn VMWare Fusion prior to continuing.

Ok and then at present that you take acquired VMWare Fusion and installed it nosotros can proceed on to setting up the "boot campsite" partition.

Firstly we need to make sure that the windows partition is set to be the agile partition, to practise this we can load "Last" > "sudo su" > "fdisk -e /dev/rdisk0" > "f 1" > "write" > "y" > "exit".

Ok now it should have set up the windows partition as the agile partitioning, Now load up "VMWare Fusion" and select "More Options" and then "Install from bootcamp" and then "Create bootcamp virtual motorcar".

Now the VM should be created and you should exist able to simply outset the VM and Windows 7, 8 or viii.ane should showtime and get-go the vmware tools install procedure. Now exit the VM and VMWare.

Now we need to restore the active partition dorsum to Bone X by doing the following load "Terminal" > "sudo su" > "fdisk -e /dev/rdisk0" > "f two" > "write" > "y" > "exit".

And now nosotros are done! click the "unity" push in VMWare to integrate it even more. We now accept VMWare with Windows + Windows as Dual Boot with Os X.

Extras

R9 270 and R9 270x users tin use this file to become graphics working correctly (http://www.osx86.net/files/file/3711-amd...lxx-series/) DON'T UNCHECK GRAPHICSENABLER DURING INSTALL OF OS Ten

Thanks to Niresh and everyone else involved!